Combi D 6
All the benefits of the proven Combi heaters - but with a diesel burner
- 6000 W rated thermal output
- Burner technology from J. Eberspächer
- Optimum distribution of warm air through four warm air outlets
- Comes with FrostControl, the current-free safety/drain valve featuring frost monitoring, as standard
- Short water heating time, but no need to cut your shower short - enjoy!
- Durable stainless steel water tank
 | |
|---|---|
| Combi D 6 | |
| Energy source | Diesel in acc. with EN 590 |
| Water capacity | 10 litres |
| Water pressure | Max. 2,8 bar |
| Heating time (from 15°C to 60°C): Boiler/Heater and boiler* | Approx. 20 min./Approx. 80 min. |
| Rated thermal output | 2000/4000/6000 W |
| Fuel consumption | 220-630 ml/h, during normal operation with average heat output (1000 W): 110 ml/h |
| Air flow rate | Max. 287 m3/h |
| Power consumption (at 12 V): Heater and boiler | 1.8 A up to temporary max. of 7 A, during normal operation with heat output of less than 2000 W: less than 1.8 A |
| Power consumption (at 12 V): Heating up boiler | Max. 1,8 A |
| Rest current | ca. 0.001 A |
| FrostControl heating element (optional) | Max. 0,4 A |
| Weight (without water) | 15,8 kg |
| Dimensions (L x W x H) | 525 x 450 x 300 mm |
| Part no. | 33500-01 |
| Attention: Dimensions are not the required minimum installation dimensions | |
| * EN 15033 | |
Additional benefits of the Combi D 6
- Four warm air connections ensure optimum air distribution via a quiet yet powerful fan
- The temperature can be infinitely adjusted on the ergonomic control panel
- During winter operation, the vehicle is heated and the water is warmed up at the same time; during summer operation, only the water is warmed up
- The asymmetrical shape of the 10-litre stainless steel boiler enables the water to be mixed more efficiently - so it warms up more evenly and rapidly - which means you can enjoy longer showers without the need to readjust any settings
- The heater can be operated even if the boiler hasn’t been filled
- The compact design enables a high degree of flexibility when selecting the installation area
- Water, gas and warm air duct connections at the side make servicing easier
- The innovative microprocessor control system ensures even more safety