- can be connected to any Truma heating system with warm air distribution
- agreeable temperature is created beneath awning
- reduces moisture in awning
- convenient and easy to operate
- optimum heat emission if caravan heater is on awning side of caravan
- full, problem-free installation in caravans and campers in less than an hour
Home › Products › Motor Homes › Air technology › Warm air distribution
Awning warmer
For agreeable warmth in the awning.
The awning warmer can be used to divert warm air from any Truma heating system with warm air distribution straight to the awning, mainly on cool evenings and mornings and during the seasonal transition periods.
The kit consists of:
- 1 m warm air duct
- 1 ventilator T-piece
- 1 shut-off
- 1 air outlet with flap
Things to take note of...
-
The warm air duct between the heater fan and the blow-out flap must be at least 1.5 m long. Shorter ducts can cause overheating the outlet if the flap is only partially open.
-
When heating the awning with the Truma-Awning warmer, warm air is diverted from the caravan’s warm air distribution system. This means that simultaneous heating reduces the heating power inside the caravan.
-
To prevent the system from being penetrated by spray water, the opening in the caravan wall must be as low as possible (must be below the main warm air duct).
-
The Truma-Awning warmer is suitable for connecting to warm air duct with diameters of up to 65 mm.
