Combi 4 E
Heat air and water with 97% efficiency and 1800 W heating elements
- 4000 W rated thermal output
- With integrated heating elements
- Unrivalled low power consumption
- Comes with FrostControl, the current-free safety/drain valve featuring frost monitoring, as standard
- Optimum distribution of warm air through four warm air outlets
- Short water heating time, but no need to cut your shower short - enjoy!
- Durable stainless steel water tank
 | | |
|---|---|---|
| Combi 4 E | Combi 6 E | |
| Energy source | Liquid gas (propane/butane) | Liquid gas (propane/butane) |
| Operating pressure | 30 mbar | 30 mbar |
| Water capacity | 10 Liter | 10 Liter |
| Water pressure | max. 2,8 bar | max. 2,8 bar |
| Heating time (from 15°C to 60°C): Boiler/Heater and boiler | Approx. 20 min./Approx. 80 min. | Approx. 20 min./Approx. 80 min. |
| Rated thermal output | 2000/4000 W | 2000/4000/6000 W |
| Rated thermal output in electrical operation | 1800 W | 1800 W |
| Rated thermal output in mixed operation | max. 3800 W | max. 5800 W |
| Fuel consumption | 160–320 g/h | 160–480 g/h |
| Air flow rate | Max. 287 m3/h | Max. 287 m3/h |
| Power consumption (at 12 V): Heating and boiler operation | 0.2 A up to temporary max. of 5.6 A (average approx. 1.1 A) | 0.2 A up to temporary max. of 5.6 A (average approx. 1.3 A) |
| Power consumption (at 12 V): Heating up boiler | Max. 0,4 A | Max. 0,4 A |
| Power consumption (at 230 V) | 3,9 A / 7,8 A | 3,9 A / 7,8 A |
| Rest current | Approx. 0,001 A | Approx. 0,001 A |
| FrostControl heating element (optional) | Approx.0,4 A | Approx. 0,4 A |
| Weight (without water) | 15,1 kg | 15,1 kg |
| Dimensions (L x W x H) | 510 x 450 x 300 mm | 510 x 450 x 300 mm |
| Attention: Dimensions are not the required minimum installation dimensions | ||
Additional benefits of the Combi 4 E
- Four warm air connections ensure optimum air distribution via a quiet yet powerful fan
- The temperature can be infinitely adjusted on the ergonomic control panel
- During winter operation, the vehicle is heated and the water is warmed up at the same time; during summer operation, only the water is warmed up
- The asymmetrical shape of the 10-litre stainless steel boiler enables the water to be mixed more efficiently - so it warms up more evenly and rapidly - which means you can enjoy longer showers without the need to readjust any settings
- The heater can be operated even if the boiler hasn’t been filled
- The compact design enables a high degree of flexibility when selecting the installation area
- Water, gas and warm air duct connections at the side make servicing easier
- The innovative microprocessor control system ensures even more safety
FrostControl - safety/drain valve
- The current-free safety/drain valve empties the boiler automatically via a drainage socket if there is a risk of frost (i.e. at around 3°C)
- The drain valve also opens in the event of excess pressure
- Drainage takes place intermittently, meaning the drainage equipment cannot freeze up
- If necessary, the drain valve can also be opened manually
- Only once the temperature of the FrostControl has risen to a level where frost is no longer a risk (i.e. at approx. 7°C) will the drain valve close again
- Current-free operation discharges the on-board battery